BBOX AMMO BOX 284 WIN AMMUNITION STORAGE 10/20/25/50 ROUNDS CRATE ORGANIZER 284win

284 WIN ammo box STL BBOX design This folder contains multiple versions of a 284 WIN ammo box. Each version is in its own subfolder and includes all STL parts needed to print that version. How to read subfolder names capacity = number of rounds the box holds variant = layout style for that capacity \(a/b\) Capacity and layout mapping 10b = 10 rounds \(2x5\) 20a = 20 rounds \(5x4\) 20b = 20 rounds \(2x10\) 25a = 25 rounds \(5x5\) 50a = 50 rounds \(5x10\) Inner samples 111\_284win\_sample\_insert\_06.stl - Sample inner part to print first and decide which inner version to use. Standard uses a tighter hole diameter. 111\_284win\_sample\_insert\_06\_XL.stl - XL has a 0.4mm larger hole diameter if standard fit is too tight. How to read STL file names Applies to: 10b, 20a, 20b, 25a, 50a 111\284win\\_01\_lower\_00.stl - Lower body of the box. 111\284win\\_02\_upper\_00.st - Upper lid, plain. 111\284win\\_03\_inner\_00.stl - Inner insert. 111\284win\\_03\_inner\_00\_XL.stl - Inner insert, XL fit version. 111\284win\\_05\_front\_00\_color.stl - Front plate with slightly recessed caliber text for color-change printing. Has to be painted in slicer before printing. 111\284win\\_05\_front\_01\_mono.stl - Front plate with recessed text for single-color printing. 111\284win\\_05\_front\_01\_mono\_insert.stl - Separate front text insert \(glued in\). Applies to: 50a only 111\284win\\_02\_upper\_01.stl - Upper lid with recessed Punisher logo for single-color printing. 111\284win\\_02\_upper\_02.stl - Separate Punisher logo insert \(glued in\)for single-color printing. 111\284win\\_02\_upper\_04.stl - Upper lid with slightly recessed caliber text for color-change printing. Has to be painted in slicer before printing. 111\284win\\_02\_upper\_05.stl - Upper lid with recessed caliber text for single-color printing. 111\284win\\_02\_upper\_06.stl - Separate caliber text insert that can be printed and glued into the lid. Recommended printing settings General \(applied for all parts\): Nozzle: 0.4mm Layer height: 0.2mm Wall loops: 2 Infill: 15% Lower: Outer wall width: 0.7mm Inner wall width: 0.7mm Outer wall speed: 60mm/s Upper: Outer wall width: 0.7mm Inner wall width: 0.7mm Outer wall speed: 60mm/s Inner: Outer wall width: 0.7mm Wall loops: 1 Infill: 0% Top shell layers: 5 Bottom shell layers: 5 No brim, raft, supports required. Caliber 284 WIN, 284win, 284 Winchester.