ABOX AMMO BOX 50 BMG AMMUNITION STORAGE 20/25/50/100 ROUNDS CRATE ORGANIZER 50MBG

50 BMG ammo box STL ABOX design This folder contains multiple versions of a 50 BMG ammo box. Each version is in its own subfolder and includes all STL parts needed to print that version. How to read subfolder names A\_120\50bmg\ capacity = number of rounds the box holds variant = layout style for that capacity \(a/b\) Capacity and layout mapping A\_120\_50bmg\_20a = 20 rounds \(5x4\) A\_120\_50bmg\_20b = 20 rounds \(2x10\) A\_120\_50bmg\_25a = 25 rounds \(5x5\) A\_120\_50bmg\_50a = 50 rounds \(5x10\) A\_120\_50bmg\_100a = 100 rounds \(10x10\) Inner samples 120\_50bmg\_sample\_insert\_06.stl - Sample inner part to print first and decide which inner version to use. Standard uses a tighter hole diameter. 120\_50bmg\_sample\_insert\_06\_XL.stl - XL has a 0.4mm larger hole diameter if standard fit is too tight. How to read STL file names Applies to: 20a, 20b, 25a, 50a, 100a 120\50bmg\\_01\_lower\_00.stl - Lower body of the box. 120\50bmg\\_01\_lower\_01\_with\_insert.stl - Lower body with integrated insert. No separate insert print needed. 120\50bmg\\_01\_lower\_01\_with\_insert\_XL.stl - Lower body with integrated insert and 0.4mm larger hole diameter for looser fit. 120\50bmg\\_02\_upper\_00.stl - Upper lid, plain. 120\50bmg\\_02\_upper\_01\_caliber\_color.stl - Upper lid with slightly recessed caliber text for color-change printing. Has to be painted in slicer before printing. How to paint in Bambu Slicer: https://wiki.bambulab.com/en/software/bambu-studio/color-painting-tool 120\50bmg\\_02\_upper\_02\_caliber\_mono.stl - Upper lid with recessed caliber text for single-color printing. 120\50bmg\\_02\_upper\_02\_caliber\_mono\_insert.stl - Separate caliber text insert that can be printed and glued into the lid. 120\50bmg\\_03\_inner\_00.stl - Inner insert. 120\50bmg\\_03\_inner\_00\_XL.stl - Inner insert, XL fit version. 120\50bmg\\_03\_inner\_01\_cut.stl - Inner insert, cut version. Allows vase-like printing with minimal retraction and potentially shorter print time. 120\50bmg\\_03\_inner\_01\_cut\_XL.stl - Inner insert, cut XL version. 120\50bmg\\_05\_front\_00\_color.stl - Front plate with slightly recessed caliber text for color-change printing. Has to be painted in slicer before printing. 120\50bmg\\_05\_front\_01\_mono.stl - Front plate with recessed text for single-color printing. 120\50bmg\\_05\_front\_01\_mono\_insert.stl - Separate front text insert \(glued in\). Recommended printing settings General \(applied for all parts\): Nozzle: 0.4mm Layer height: 0.2mm Wall loops: 2 Infill: 15% Lower: Outer wall width: 0.7mm Inner wall width: 0.7mm Outer wall speed: 60mm/s Upper: Outer wall width: 0.7mm Inner wall width: 0.7mm Outer wall speed: 60mm/s Inner: Outer wall width: 0.7mm Wall loops: 1 Infill: 0% Top shell layers: 5 Bottom shell layers: 5 No brim, raft, supports required. Caliber "50 BMG.