{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreierza6zltf6bx2mk6ysr3yk2eokspzh5cdhclvwsuvacwd3ta472m",
    "uri": "at://did:plc:xujdr3kkymg5kkm7hdlmdszy/app.bsky.feed.post/3mmfxueavb2u2"
  },
  "coverImage": {
    "$type": "blob",
    "ref": {
      "$link": "bafkreia56li7clr73mlehdzpfh57mglhwmrx6itdimpqj67i3ehdmlqyae"
    },
    "mimeType": "image/jpeg",
    "size": 35220
  },
  "path": "/en/3d-model/game/axial-scx30-micro-camper",
  "publishedAt": "2026-05-22T02:08:32.000Z",
  "site": "https://cults3d.com",
  "tags": [
    "game"
  ],
  "textContent": "Fully Printed(minus hardware) SCX30 Camper trailer!\nWe have a Car hauler too! check our designs for more\n\nPrint the tires from your desired TPU hardness, I prefer 85a or softer with very light infil in the tires. the hinges used are also designed for tpu prints, glue the front door hinge and use screws to secure the rear \"hatch\". \n\nYou will need \nOne M2X16mm  (Or longer) for the axle shaft\nNine m2x8mm\nfour m2x5mm \nAlso you will want two m2x4mm for the bed/storage section if its used. \n\n\nAssembled as shown in photos, the M2x5mm are used to secure the neck of the trailer to the bed of it from the bottom.\n\nTake care not to over tighten the axle screws otherwise the wheels may end up working themselves off. \n\nUse a scx24 stock shock ball end or a M2 screw as the ball for the hitch.",
  "title": "Axial SCX30 Micro camper"
}