Wizard Dinosaur Figurine 3D Print STL

Overview Stylized cat figurine in an upright seated pose wearing a large hooded wizard robe and pointed hat. The model holds an open spellbook centered in front of the body with both paws attached directly to the book edges. The robe forms a continuous enclosed lower structure that reaches the ground on all sides, creating a wide stable base. The hood wraps tightly around the head with layered cloth folds connected directly into the cape and sleeves. The entire model is compact with no separated floating parts. The spellbook, sleeves, and robe are integrated into a single balanced silhouette. Features Thick robe geometry with continuous surface flow Large contact area at the bottom for print stability Compact centered weight distribution Open book integrated between both arms for structural support Rounded cloth folds with smooth layered transitions Minimal exposed thin geometry Recessed hood opening protects facial details Symmetrical front composition improves balance Enclosed lower body reduces instability during printing Fine facial details including whiskers, ears, eyes, and nose The robe and cape create natural support reinforcement around the lower half of the model. The model remains visually dense without large unsupported extensions. Use Cases Fantasy desk decor Collectible figurine Resin display piece Miniature painting project Shelf decoration Tabletop fantasy accessory Unique Aspects The oversized hood creates a circular frame around the face, making the head the visual focal point. The spellbook placement forms a centered layered composition between the sleeves and robe folds. The enclosed robe structure gives the model a single-piece sculpted appearance instead of separated body sections. The pointed hat curves backward into the silhouette instead of extending outward aggressively, helping maintain compact geometry. Parámetros de impresión 3D Recommended Printer Type: Resin preferred, FDM compatible Material: PLA Layer Height: 0.12–0.2 mm Infill: 10–20% Orientation: Upright position Supports Required: Under the hood rim Under the sleeves Bottom side of the spellbook Inner cloth overhangs near the arms Weak Points: Whiskers Thin book corners Difficulty: Medium