Portable heated Lipo Battery Case

Keep your batteries in optimal condition at all times, unfazed by frigid environments. Tailored specifically for low - temperature flight conditions, this case is equipped with an efficient heating system and offers an adjustable temperature control range from 20℃ to 80℃. It swiftly revives battery activity even in extreme cold, guaranteeing stable power output. Heatuptime 5mins with 40watt draw, then tempstable 1h without additional draw cause of case insulation designed case. Four Compartments are active heatet, other two are storage which are passive heated too. Input compartment designed for 4S 5200mah max. 37X45X160mm. No additional cables needed, cause you can use the cutoff from Siliconpads. Compartsmentsizes: - 4x 45,4x96x45mm active heated compartment (60mm height without top heating pad, you can also use just one heating pad) - 2x 45,4x96x60mm storage compartment - 1x 42x180x60mm input battery compartment Inputpower: max 40Watts (just for 5mins to heat up) Inputvoltage: 6-30Volt (2S - 6S Lipo) Requiered Components: - Temp Controller XY-WT04(-W); (W is with Wifi Adapter) - Silicone Heating Pad Square Rubber Heat Mat 150x50mm 24V 20Watt - Right Plug Adapter for your Lipo OR Balancerportadapter (recommended for ControllerInput) - 6x M3x30mm SHCS or ButtonHead - Optional Aluminum Tape for additional insulation (shwon in pictures) - 2x Fuseholder Panelmount 5x20mm with 2x 1A Fuse (optional but recommended for safety reasons) Recommended adjustment for Tempcontroller: 35℃ gets your Lipo to 40℃ Surfacetemp because of offset from Tempcontroller Sensor. Have Fun!