{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreic7fdskfhjbxtnlkkvrhibfgehgum6s3wjwh3zsi7zdwkwzskdwjq",
    "uri": "at://did:plc:xujdr3kkymg5kkm7hdlmdszy/app.bsky.feed.post/3mlg25lroglb2"
  },
  "coverImage": {
    "$type": "blob",
    "ref": {
      "$link": "bafkreicuk6rxs6xkfteeskpnd2hdqwe3l3ux65kngvmwe32drorh4bye34"
    },
    "mimeType": "image/png",
    "size": 301080
  },
  "path": "/en/3d-model/game/mtw-gen2-308-conversion-kit-the-3d08",
  "publishedAt": "2026-05-09T09:45:40.000Z",
  "site": "https://cults3d.com",
  "tags": [
    "game"
  ],
  "textContent": "Give your MTW Gen 2 a bold .308 battle rifle look with the .3D08 Conversion Kit.\n\nThis is a complete kit including:\n\nUpper receiver\n\nLower receiver with integrated inner barrel mounting\n\nAdjustable outer barrel system\n\nBarrel nut\n\nHandguard\n\nCustom pistol grip with battery storage\n\nThe lower receiver also features a Picatinny rail, so you can mount the stock setup you prefer.\n\nAssembly Guide:\n\nJoin the upper and lower receiver with three M5 screws; an M5 screw and nut set is recommended.\n\nSlide the long barrel sleeve into the barrel nut from the rear and secure it with glue.\n\nSlide the barrel nut onto the upper receiver over the barrel and hop-up chamber, then glue it in place.\n\nThe outer barrel is split, with the recommended print orientation shown in the pictures. This allows you to adjust the barrel length before gluing it into the barrel sleeves.\n\nThe handguard snaps onto the barrel nut and only needs a small amount of glue.\n\nA built-in barrel guide inside the handguard keeps the barrel centered.\n\nEach handguard rail is attached with M5 screws and nuts.\n\nInternal parts fit snugly and function properly. The kit has been tested with the standard hop-up unit.",
  "title": "MTW Gen2 308 Conversion Kit | The .3D08!"
}