{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreiaxw4mqwjj2ai77c7lvgigi2xoqf6agqljcwmedng4nm2aoy34ws4",
    "uri": "at://did:plc:xujdr3kkymg5kkm7hdlmdszy/app.bsky.feed.post/3mlcb7ca6cr42"
  },
  "coverImage": {
    "$type": "blob",
    "ref": {
      "$link": "bafkreickihydc3nzfymmghd4s4kp7ekel4xm4cqjsphkutnhv7neh3fexm"
    },
    "mimeType": "image/png",
    "size": 362859
  },
  "path": "/en/3d-model/gadget/yolka-drone-interceptor-300km-h-30km-500g-payload",
  "publishedAt": "2026-05-07T21:35:18.000Z",
  "site": "https://cults3d.com",
  "tags": [
    "gadget"
  ],
  "textContent": "YOLKA is an experimental high-speed interceptor drone platform inspired by the concept of modern anti-drone interceptors with a unique dual-wing aerodynamic configuration.\nThis project was recreated and redesigned as a fully modular 3D printable airframe for FPV and interceptor research purposes.\n\nThe drone is designed around a 7-inch propulsion system and features a fully modular internal layout, allowing quick access to electronics, payload systems, and maintenance.\n\n⚠️ This is an experimental prototype platform.\nThe drone has not been flight tested yet and requires tuning, testing, and further development by the community.\n\nMain Features\nModular 3D printable construction\nDual-wing aerodynamic layout\nDesigned for 7-inch propellers\nEasy access to all internal systems\nFPV and thermal camera support\nLarge internal battery compartment\nSeparate payload module\nOptimized for customization and future upgrades\nFull creator support included\nInternal Layout\n1. Nose / Camera Module\n\nThe front module is designed to house:\n\nCaddx Ratel Pro FPV camera\nCaddx Thermo 640 thermal camera\nRush Solo Max VTX\n\nThe nose section is attached using M3 screws and requires embedded M3 brass inserts/nuts during assembly.\n\n2. Battery Module\n\nDedicated compartment for:\n\n6S2P 21700 battery pack\n\nThe internal layout allows secure battery positioning while maintaining balanced weight distribution.\n\n3. Payload Module\n\nA separate modular compartment intended for:\n\nExperimental payloads\nAdditional electronics\nCustom mission equipment\nFuture interceptor systems\n\nThe payload section can be modified and improved by users.\n\n4. Electronics Module\n\nRear electronics section supports:\n\n4x ESCs (60A–80A recommended)\nWiring and power distribution\nCooling airflow channels\n\nThe flight controller is mounted on the lower internal section for easy access and cable management.\n\nAssembly\n\nAll major sections are connected modularly, allowing:\n\nEasier transportation\nFast maintenance\nSimplified upgrades\nEasy reprinting of damaged parts\n\nThe model is optimized for FDM 3D printing.\n\nImportant Notice\n\nThis drone is currently an experimental development platform.\n\nIt has:\n\nNOT been flight tested\nNOT been aerodynamically validated\nNOT been tuned\n\nTesting, tuning, and community improvements are highly encouraged.\n\nBy purchasing this model, you also receive:\n\n✅ Full support from the creator\n✅ Future improvements and updates\n✅ Community-driven development\n✅ Possible upgraded versions based on user feedback\n\nIf you improve the design — your ideas and modifications are welcome and may be added to future releases.\n\nRecommended Hardware\n7-inch propellers\n6S power system\n21700 Li-Ion cells\n60A–80A ESCs\nLong-range FPV setup\nThermal camera system\n\nDisclaimer\n\nThis is a digital 3D model intended for research, experimental FPV development, and educational purposes.\n\nThe buyer assumes full responsibility for assembly, testing, electronics integration, and operation.\n\n⚠️ Only STL files are included in this listing.\n\nSTEP and DXF source files are provided only on request and only to verified buyers.\n\nWe do NOT work with:\n\ncitizens of the Russian Federation\n\ncitizens of Belarus\n\ncompanies or intermediaries related to these countries\n\nAny requests from these regions will be ignored.",
  "title": "YOLKA Drone Interceptor // 300km/h // 30km // 500g payload"
}