{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreihkchq6sdpnmymp3qdr5njnua35rn6yegbt7buwcv5mgjd227ihqq",
    "uri": "at://did:plc:xujdr3kkymg5kkm7hdlmdszy/app.bsky.feed.post/3mkkdh4kjffk2"
  },
  "coverImage": {
    "$type": "blob",
    "ref": {
      "$link": "bafkreicxj5slmpw2rhqpnlv3uoz46q63yvhtywi4yfljniucaxqtszdqta"
    },
    "mimeType": "image/png",
    "size": 178810
  },
  "path": "/en/3d-model/game/mudwalker-modular-articulated-mech-platform",
  "publishedAt": "2026-04-28T08:56:16.000Z",
  "site": "https://cults3d.com",
  "tags": [
    "game"
  ],
  "textContent": "Meet Mudwalker — a compact, fully articulated mech platform designed for customization, loadouts, and experimentation.\n\nThis is not just a single model, but a modular system where parts can be swapped to create different configurations — from heavy weapon carriers to utility units.\n\n🔧 Features\n✅ Print-in-place articulated legs and arms\n✅ Working opening hatch\n✅ Detailed articulated hands (3 fingers)\n✅ Multiple weapon and equipment options\n✅ Stable, poseable design\n🔁 Modularity System\n\nMudwalker uses a friction-fit hex connector system:\n\n🔹 Small hex – for legs\n🔹 Large hex – for arms, hands, and back modules\n\nNo screws or magnets required — parts can be:\n\nEasily attached\nSwapped between builds\nReconfigured anytime\n\n🧩 Assembly\nLegs and arms are print-in-place\nFingers are printed separately and connected using 1.75mm filament pins\nCut small filament pieces and insert them to assemble fingers\n⚠️ Important – First Movement\n\nJoints are slightly fused by design for reliable printing.\n\n👉 Before use:\n\nCarefully “snap” each joint free\nApply slow, controlled pressure\nYou should feel a small “click” as joints release\nDo this gently to avoid damage\n\nOnce released, joints should move smoothly.\n\n⚠️ Important – Print Orientation\nHands and legs must be printed in the exact orientation provided in the print profile\nChanging orientation may cause hinges to fuse or fail\n🧪 Print Settings (Tested)\nMaterial: PLA (works great)\nLayer height: 0.16 mm\nSupports: ✅ Auto-generated supports used\nBrim: Optional\nInfill: 10–15%\n💡 Tips\nRemove supports carefully around joints and hatch\nWork joints gradually if they feel stiff\nSlight scaling (99–100%) can tune joint tightness\nA small amount of lubricant can improve motion",
  "title": "Mudwalker – Modular Articulated Mech Platform"
}