Parkside X20 Battery Adapter for Bosch Professional 18V Tools

Required Components (not included): 2 × 6.3 mm male faston terminals 4 × female faston terminals 2 × silicone wires 1.5 mm² (10 cm length) 4 × wood screws 1 × 13K resistor 1 × 10K resistor 1 × small metal pin/shaft (I used TIG welding wire) Assembly Notes Connect all components as shown in the reference image After placing the terminals into the 3D printed adapter, they must be secured using glue or liquid plastic Ensure all connections are properly fixed before use