T238 Speed Loader Battery Storage

3D‑Print Extension for T238 Speedloader Looking for a way to use bigger batteries in your T238 Speedloader? Same here. What really annoyed me was that I couldn’t use batteries from my other AEGs because they were simply too big for the Speedloader. So I decided to fix that myself and designed this extension. The battery extension gives you a lot more space in the battery compartment. On top of that, it also has room to store the other adapters, so everything stays in one place instead of floating around. I also designed a protective cover, which is especially useful during transport: protects the display and buttons keeps the fill lid closed so no BBs can spill out includes a plug for the feed tube, so BBs inside won’t fall out either Installation Bottom / Battery Extension Remove the 4 screws from the bottom and take off the original battery compartment Mount the extension using the original screws Tip: Glue the 2× M3 nuts in place with super glue so they don’t get pushed out by accident Cover Feed the bungee cord from the outside to the inside through one of the holes Tie a knot on the back Measure the needed length and tie another knot on the back Done Additional Hardware Required (not included) Bottom 2× M3 nuts 2× M3×14 mm countersunk screws Cover approx. 30 cm bungee cord (2.5 mm or 3 mm)