CSM & Lunar module display stand

This is a display stand for Apollo 11's Lunar module and CSM. The design was inspired by the Saturn V's display stand that we designed previously. We wanted to design it as if it were on display in an actual aerospace museum.

It's very easy to print and make, but you need to be very careful when placing the CSM and Lunar module.

1. Place the CSM with the antenna facing upward.
2. The Lunar module must be placed with the fuel tank (right side of the hatch) facing down.
3. There is a risk that the Descent Stage (lower part) of the Lunar module may be separated, so please use adhesive to secure it to the Ascent Stage (upper part).

Please check the video and photos for the position and shape of this display stand.

https://www.youtube.com/watch?v=ExO0r1kDZXs

I hope you can nicely display the Lunar module and CSM you designed with this display stand!

1 : 48 scale Design by GOODesign

Largest part in printing, size= X 191mm, Y 100mm, Z 120mm, After full assembly size= X 318mm, Y 100mm, Z 200mm

Total Build Time : 50h 20m / Plastic Weight : 145g