{
  "$type": "site.standard.document",
  "description": "A workpiece for a fuel injection component is made of a steel having compositions, by mass %, of C: 0.08 to 0.16%, Si: 0.10 to 0.30%, Mn: 1.00 to 2.00%, S: 0.005 to 0.030%, Cu: 0.01 to 0.30%, Ni: 0.40 to 1.50%, Cr: 0.50 to 1.50%, Mo: 0.30 to 0.70%, V: 0.10 to 0.40%, s-Al: 0.001 to 0.100%, and Fe…",
  "path": "/patents/1250034",
  "publishedAt": "2019-12-12T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "F02M61/168",
    "DENSO CORPORATION"
  ],
  "textContent": "A workpiece for a fuel injection component is made of a steel having compositions, by mass %, of C: 0.08 to 0.16%, Si: 0.10 to 0.30%, Mn: 1.00 to 2.00%, S: 0.005 to 0.030%, Cu: 0.01 to 0.30%, Ni: 0.40 to 1.50%, Cr: 0.50 to 1.50%, Mo: 0.30 to 0.70%, V: 0.10 to 0.40%, s-Al: 0.001 to 0.100%, and Fe and unavoidable impurities as remaining components. After heating the workpiece to a temperature of 950° C. or more and 1350° C. or less, the workpiece is subjected to a hot forging, and thereafter cooled at an average cooling rate of 0.1° C./sec. or more in a temperature range from 800° C. to 500° C., and at the average cooling rate of 0.02° C./sec. or more and 10° C./sec. or less in the subsequent temperature range from 500° C. to 300° C. to set an area ratio of a bainite structure after hot forging to 85% or more.",
  "title": "METHOD FOR MANUFACTURING FUEL INJECTION COMPONENT"
}