{
  "$type": "site.standard.document",
  "description": "Provided is a diphosphorus pentasulfide composition for a sulfide-based inorganic solid electrolyte material, in which a molar ratio (S/P) of a content of sulfur (S) to a content of phosphorus (P) is 2.40 or higher and 2.49 or lower. In the diphosphorus pentasulfide composition for a sulfide-based…",
  "path": "/patents/1313334",
  "publishedAt": "2022-03-17T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "H01M10/0562",
    "FURUKAWA CO., LTD."
  ],
  "textContent": "Provided is a diphosphorus pentasulfide composition for a sulfide-based inorganic solid electrolyte material, in which a molar ratio (S/P) of a content of sulfur (S) to a content of phosphorus (P) is 2.40 or higher and 2.49 or lower. In the diphosphorus pentasulfide composition for a sulfide-based inorganic solid electrolyte material, in a DSC curve of the diphosphorus pentasulfide composition obtained by measurement using a differential scanning calorimeter under conditions of a start temperature of 25° C., a measured temperature range of 30° C. to 350° C., a temperature increase rate of 5° C./min, and an argon atmosphere with a flow rate of 100 ml per minute, an endothermic peak is shown in a temperature range of 280° C. or higher and 300° C. or lower, and a half-width of the endothermic peak is 4.1° C. or higher.",
  "title": "DIPHOSPHORUS PENTASULFIDE COMPOSITION FOR SULFIDE-BASED INORGANIC SOLID ELECTROLYTE MATERIAL"
}