{
  "$type": "site.standard.document",
  "description": "A steel pipe for a fuel injection pipe has a chemical composition consisting of, by mass %: C: 0.17 to 0.27%, Si: 0.05 to 0.40%, Mn: 0.30 to 2.00%, P: 0.020% or less, S: 0.0100% or less, O: 0.0040% or less, Ca: 0.0010% or less, Al: 0.005 to 0.060%, N: 0.0020 to 0.0080%, Ti: 0.005 to 0.015%, Nb…",
  "path": "/patents/1316844",
  "publishedAt": "2022-05-05T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "F02M37/0017",
    "NIPPON STEEL CORPORATION"
  ],
  "textContent": "A steel pipe for a fuel injection pipe has a chemical composition consisting of, by mass %: C: 0.17 to 0.27%, Si: 0.05 to 0.40%, Mn: 0.30 to 2.00%, P: 0.020% or less, S: 0.0100% or less, O: 0.0040% or less, Ca: 0.0010% or less, Al: 0.005 to 0.060%, N: 0.0020 to 0.0080%, Ti: 0.005 to 0.015%, Nb: 0.015 to 0.045%, Cr: 0 to 1.00%, Mo: 0 to 1.00%, Cu: 0 to 0.50%, Ni: 0 to 0.50%, V: 0 to 0.15%, and the balance: Fe and impurities. The metal micro-structure consists substantially of tempered martensite, or tempered martensite and tempered bainite. The hardness is within the range of 350 to 460 HV1. A lattice spacing of a (211) diffraction plane measured by CoKα characteristic X-ray diffraction is 1.1716 Å or less, and a half-value width of the (211) diffraction plane is 1.200° or less. The number density of cementite having a diameter of 50 nm or more is 20/μmor less.",
  "title": "STEEL PIPE FOR FUEL INJECTION PIPE, AND FUEL INJECTION PIPE USING SAME"
}