{
  "$type": "site.standard.document",
  "description": "Inlet and outlet ports are in the top part of a base; a reservoir is in the bottom part of the base; pumps are between the inlet port and the reservoir; a pressure booster valve, a depressurizing valve, a cut valve, and a caliper pressure sensor are along the center axis of each pump; the pressure…",
  "path": "/patents/948107",
  "publishedAt": "2015-12-02T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "B60T13/686",
    "NISSIN KOGYO KK [JP]"
  ],
  "textContent": "Inlet and outlet ports are in the top part of a base; a reservoir is in the bottom part of the base; pumps are between the inlet port and the reservoir; a pressure booster valve, a depressurizing valve, a cut valve, and a caliper pressure sensor are along the center axis of each pump; the pressure booster valve is above the center axis; the depressurizing valve is below the center axis; the cut valve is between the pressure booster valve and the depressurizing valve and is nearer the middle of the base than the pressure booster valve and the depressurizing valve; and a suction valve is between the depressurizing valves aligned nearer the end of the base than a vertical reference line passing through the rotational center axes of the pumps. The suction valve communicates with cut valves, and a master pressure sensor is on the reference line.",
  "title": "VEHICULAR BRAKE HYDRAULIC PRESSURE CONTROLLER"
}