METHOD FOR PRODUCING CERIUM COMPLEX OXIDE, SOLID OXIDE FUEL CELL, AND FUEL CELL SYSTEM

On the other hand, the possibility of estimating the dopant ratio of a metal element to each ceria crystalline particle using integral-width or half-width obtained by XRD was considered as follows: an XRD peak is shifted depending on the dopant ratio of La to ceria; when La increases, an XRD peak is shifted to a lower angle; in XRD performed on a raw material obtained by mixing ceria crystalline particles having different dopant ratio, peaks corresponding to the respective dopant ratio exist close to each other; as a result, a peak width is widened; accordingly, the dopant ratio of a metal element to each ceria crystalline particles are supposed to vary when integral-width and half-width obtained by XRD are large. Thus, it was revealed for the first time that integral-width and half-width obtained by XRD indicate variations in dopant ratio. It should be noted that from the direct proportional relationship between the dopant ratio x and the integral-width for dopant ratio ranging from 0.35 to 0.45, integral-widths obtained by XRD are derived to be 0. 10 to 0.30 for dopant ratio ranging from 0.35 to 0.45, and half-widths are derived to be 0.10 to 0.30 similarly.