{
  "$type": "site.standard.document",
  "description": "A method of making a flame resistant airbag suitable for use in aviation applications is discussed. A flame resistant fabric for the use in the construction of aviation airbags is woven from a high tenacity continuous polyester fiber substrate. A polyurethane coating is applied to the woven fabric…",
  "path": "/patents/1384939",
  "publishedAt": "2017-11-09T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "D03D15/12",
    "SCHROTH SAFETY PRODUCTS LLC"
  ],
  "textContent": "A method of making a flame resistant airbag suitable for use in aviation applications is discussed. A flame resistant fabric for the use in the construction of aviation airbags is woven from a high tenacity continuous polyester fiber substrate. A polyurethane coating is applied to the woven fabric, which has been treated with a flame retardant, to impart high pressure permeability resistance to the flame resistant fabric. The resulting fabric complies with Federal Aviation Requirement 25.853 as well as exhibits sufficient high pressure permeability resistance which is measured as a pressure of not less than about 198 kPa after five seconds from an initial inflation and pressurization to about 200 kPa, such as may be encountered in and during an inflation of aviation airbag assemblies.",
  "title": "METHOD OF MAKING A FLAME RESISTANT AIRBAG SUITABLE FOR USE IN AVIATION APPLICATIONS"
}