{
  "$type": "site.standard.document",
  "description": "The guide rail is made by rolling from a thin sheet of metal. The teeth (4) may be cut in the edges of a flat blank before it is bent into the U-shape. The U-shape has a flat horizontal bottom (2) joined to the vertical sides (1) by sharp 90 degree bends. Further sharp 90 degree bends join the tops…",
  "path": "/patents/1092065",
  "publishedAt": "2003-11-05T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "B21D5/08",
    "TILLMANN PROFIL GMBH [DE]"
  ],
  "textContent": "The guide rail is made by rolling from a thin sheet of metal. The teeth (4) may be cut in the edges of a flat blank before it is bent into the U-shape. The U-shape has a flat horizontal bottom (2) joined to the vertical sides (1) by sharp 90 degree bends. Further sharp 90 degree bends join the tops of the sides to the inward-extending flanges (3) and the edges of the flanges are bent downward through 90 degrees to form the downwardly turned teeth.",
  "title": "Method for producing a slide with an internal toothing and slide produced according to this method"
}