{
  "$type": "site.standard.document",
  "description": "The charging air cooler is completely of aluminum. It has an intake collection chamber (4) containing a charging air pre-cooler (10), which almost completely fills the large area of the collection chamber. This causes almost all of the charging air flow to pass the pre-cooler. The pre-cooler is…",
  "path": "/patents/1098674",
  "publishedAt": "2003-01-29T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "F02B29/0412",
    "MODINE MFG CO [US]"
  ],
  "textContent": "The charging air cooler is completely of aluminum. It has an intake collection chamber (4) containing a charging air pre-cooler (10), which almost completely fills the large area of the collection chamber. This causes almost all of the charging air flow to pass the pre-cooler. The pre-cooler is soldered, and has flat tubes for coolant fluid and intermediate ribbed channels for the charging air. The channels have a depth of between 25 and 200mm. Each flat tube is followed by a corrugated rib heat exchanger (8) for the cooling air, which is soldered to the flat sides of the tubes.",
  "title": "Air-cooled intake air cooler"
}