{
  "$type": "site.standard.document",
  "description": "On the right and left sides of a housing (1), for example of a car radio, there is arranged in each case a locking spring (2) protruding from the housing (1), which can be pushed into an installation slot (3) by inserting the housing (1) and can be retracted into the housing (1) by turning a latch…",
  "path": "/patents/1100736",
  "publishedAt": "2002-10-30T00:00:00.000Z",
  "site": "at://did:plc:oql6ds5vnff4ugar6rruliwd/site.standard.publication/3mn3ohu7oxx5w",
  "tags": [
    "B60R11/0205",
    "HARMAN BECKER AUTOMOTIVE SYS [DE]"
  ],
  "textContent": "On the right and left sides of a housing (1), for example of a car radio, there is arranged in each case a locking spring (2) protruding from the housing (1), which can be pushed into an installation slot (3) by inserting the housing (1) and can be retracted into the housing (1) by turning a latch (5). By turning the latches (5) in the opposite rotational direction, the locking springs (2) can be released again. On the upper side 14 of each latch (5), a pin (8) is arranged off-center, for which a guide slot (9) is arranged in the installation slot (3) such that the housing (1) can only be pushed into the installation slot (3) when the locking springs (2) are protruding from the housing (1). After the housing (1) has been inserted into the installation slot (3), the locking springs (2) engage at locking edges (4) of the installation slot (3) in order to lock the housing (1). To remove the housing (1) from the installation slot (3), the locking springs (2) are retracted into the housing (1) by turning the latches (5). When the housing (1) is pulled out, the pins (8) of the latches (5) strike the installation slot (3), whereby the latches (5) are turned into the locked position and the pins (8) can slide through the guide slots (9). After being pulled out of the installation slot (3), the locking springs (2) snap out of the housing (1) into the locked position again. The housing (1) can now be pushed into the installation slot (3) again and is automatically locked after insertion because the locking springs (2) engage at the locking edges (4), without requiring any manual operation for this purpose.",
  "title": "Case"
}