{
"$type": "site.standard.document",
"bskyPostRef": {
"cid": "bafyreih6m3doj6nxko3ecugnlmrev3tbz35r74ix3aue62aelyal6l4mx4",
"uri": "at://did:plc:dmpmpvgbtnjd7pz4pxvvcwle/app.bsky.feed.post/3mkpqiofinjj2"
},
"path": "/2026/04/30/forlinx-up4-a-40x40-mm-lcc-lga-system-on-module-family-with-rockchip-nxp-and-allwinner-cpu-options/",
"publishedAt": "2026-04-30T10:26:04.000Z",
"site": "https://www.cnx-software.com",
"tags": [
"Allwinner T-Series",
"Hardware",
"Linux",
"NXP i.MX",
"Rockchip RK35xx",
"allwinner",
"edge ai",
"forlinx",
"hmi",
"industrial",
"networking",
"nxp",
"qt",
"rockchip",
"som",
"Forlinx UP4 – A 40×40 mm LCC + LGA system-on-module family with Rockchip, NXP, and Allwinner CPU options",
"CNX Software - Embedded Systems News"
],
"textContent": "Forlinx Embedded UP4 is a new family of pin-to-pin compatible system-on-modules currently offered with Rockchip RK3568J/RK3562J, NXP i.MX 9352, or Allwinner T527N/T536 processors. The UP4 modules measure just 40×40 mm and expose 487 pins through a hybrid LCC (Leadless Chip Carrier) and LGA (Land Grid Array) design with 1.0mm contact pitch and 1.27mm ball pitch, respectively. This should allow companies to design a single carrier board for multiple CPU variants. Forlinx UP4 specifications: SoC FET-MX9352-UP4 – NXP i.MX 9352 with 2x Arm Cortex-A55 cores @ up to 1.7 GHz, Cortex-M33 real-time core @ 250 MHz, 2D GPU only, 0.5 TOPS Arm Ethos U65 microNPU FET3568-UP4 – Rockchip RK3568B2/J with 4x Arm Cortex-A55 cores @ up to 2.0/1.8 GHz, Arm Mali-G52 MP2 3D GPU, 1 TOPS AI NPU FET3562J-UP4 – Rockchip RK3562J with 4x Arm Cortex-A53 cores @ 1.8 GHz, Arm Mali-G52-2EE 3D GPU, 1 TOPS NPU FET527N-UP4 – Allwinner T527N [...]\n\nThe post Forlinx UP4 – A 40×40 mm LCC + LGA system-on-module family with Rockchip, NXP, and Allwinner CPU options appeared first on CNX Software - Embedded Systems News.",
"title": "Forlinx UP4 – A 40×40 mm LCC + LGA system-on-module family with Rockchip, NXP, and Allwinner CPU options"
}