{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreihq7hsjte7blwggnd2nddyc2uz66va6kkb7kjzybpx267qwbr4ubu",
    "uri": "at://did:plc:dmpmpvgbtnjd7pz4pxvvcwle/app.bsky.feed.post/3mh3jgrdwwhu2"
  },
  "path": "/2026/03/15/aeris-10-open-source-hardware-radar-can-track-multiple-objects-up-to-20km-away/",
  "publishedAt": "2026-03-15T04:48:27.000Z",
  "site": "https://www.cnx-software.com",
  "tags": [
    "Hardware",
    "STMicro STM32",
    "Xilinx Artix",
    "diy",
    "fpga",
    "military",
    "open source",
    "python",
    "radar",
    "stm32",
    "verilog",
    "vhdl",
    "wireless",
    "AERIS-10 open-source hardware radar can track multiple objects up to 20km away",
    "CNX Software - Embedded Systems News"
  ],
  "textContent": "AERIS-10 is an open-source hardware, “low-cost” (more on that later) 10.5 GHz phased array radar system featuring Pulse Linear Frequency Modulated (LFM) modulation and based on an AMD Artix-7 FPGA. Two versions are available: the AERIS-10N (Nexus), providing up to 3km range with an 8×16 patch antenna array, and the AERIS-10X (Extended), offering up to 20km range thanks to a 32×16 dielectric-filled slotted waveguide array. ARIES-10 key components and features: Main board FPGA – AMD Artix-7 XC7A100T for: PLFM Chirps generation via the DAC Raw ADC data read Automatic Gain Control (AGC) I/Q Baseband Down-Conversion Decimation Filtering Forward FFT Pulse Compression Doppler, MTI, and CFAR processing USB Interface MCU – ST STM32F746xx microcontroller for Power management FPGA communication Setup and interface with the components on the main, frequency synthesizer, and power amplifier boards, plus: GPS module for GUI map centering GY-85 IMU for pitch/roll correction of target coordinates BMP180 Barometer [...]\n\nThe post AERIS-10 open-source hardware radar can track multiple objects up to 20km away appeared first on CNX Software - Embedded Systems News.",
  "title": "AERIS-10 open-source hardware radar can track multiple objects up to 20km away"
}