{
  "$type": "site.standard.document",
  "bskyPostRef": {
    "cid": "bafyreifkrgitqnx2haohlvg3zzumok2z6qyugcmnu3juejpgni5pffosoq",
    "uri": "at://did:plc:5y2ps7xhcqmc2d63b73ui72s/app.bsky.feed.post/3ml7bshywsts2"
  },
  "coverImage": {
    "$type": "blob",
    "ref": {
      "$link": "bafkreicefjdiureesfitlrhzidopaw2kmpzfma7yhspbudwvetjzw5nqhq"
    },
    "mimeType": "image/png",
    "size": 2797203
  },
  "description": "I used wood burning paste and a heat gun to make a sign for “Finch HQ” (and the cheeky “HMP Finch”). It worked - but skipping sanding and not using a nozzle meant uneven results and a long 10-minute burn time. Lessons learned and a rustic finish to show for it.",
  "path": "/wood-burning-paste-heat-guns-and-a-lesson-in-patience-for-finch-hq/",
  "publishedAt": "2026-05-06T18:00:28.000Z",
  "site": "https://blog.php-systems.com",
  "tags": [
    "A heat gun",
    "Scorch Wood Burning Paste",
    "pine circle"
  ],
  "textContent": "I recently took on a small craft project with a bit of personality behind it - creating a wooden sign for a finch rescue I support, lovingly called _“Finch HQ”_. Of course, no proper organisation is complete without a tongue-in-cheek counterpart, so the reverse side reads _“HMP Finch”_ … reserved, naturally, for the more _enthusiastic_ residents. For more information, have a look at their Facebook and Instagram pages.\n\nfacebook.com/tweetretreatsbirdieboarding\n\ninstagram.com/tweetretreatsbirdieboarding\n\nThe goal was to burn both phrases into a wooden plaque using wood burning paste and a heat gun. Simple in theory. Slightly more chaotic in practice, just like Finch HQ.\n\n* * *\n\n### Tools You'll Need\n\nTo get started with this type of wood burning, you will need:\n\n  * A heat gun\n  * Scorch Wood Burning Paste\n  * Something to burn - I used this pine circle from Hobby Craft\n  * A Stencil - I made my own using a Cricut Joy Vinyl Cutter.\n  * A brush\n  * Something to scrape the paster across - like an old business card or loyalty card.\n\n\n\n* * *\n\n### The Setup\n\nI started with a ready-to-go wooden piece from Hobbycraft, some wood burning paste, a stencil for the lettering using my Cricut joy, and a standard heat gun.\n\nApplication of the paste was straightforward:\n\n  * Apply through the stencil\n  * Peel carefully\n  * Try not to smudge anything (easier said than done)\n\n\n\nAt this point, everything looked promising. The paste was cleanly applied, and the text - _“Finch HQ”_ on one side and _“HMP Finch”_ on the other - was nicely defined. You don't need a lot of paste, just a thin layer.\n\n* * *\n\n### Where It Went Wrong (and What I’d Do Differently)\n\n#### 1. I Skipped Sanding the Wood\n\nThis was my first mistake.\n\nThe surface looked smooth enough out of the shop, so I didn’t bother sanding it down beforehand. Big miss. The uneven grain affected how the paste reacted to heat, leading to slightly inconsistent burning.\n\n**Lesson learned:**\nAlways sand the wood first. Even a quick pass makes a noticeable difference in how clean and even the burn turns out.\n\n* * *\n\n#### 2. No Nozzle = Slow Burn\n\nThe second issue was heat application.\n\nApplying the heat with a heat gun.\n\nI used a heat gun without a nozzle attachment, which meant the hot air was dispersed over a wider area instead of being focused directly on the paste.\n\nThe result?\nIt took a solid **10 minutes** of heating before the burn effect properly appeared.\n\nNot only was that longer than expected, but it also made it harder to control the intensity of the burn. The wood also got hot too.\n\n**Lesson learned:**\nUse a nozzle. Directing the heat speeds things up significantly and gives you far more control over the final look.\n\n* * *\n\n### The Payoff\n\nDespite the hiccups, the burn effect did eventually come through - and it looked great.\n\nThe contrast between the darkened lettering and the natural wood gave both _“Finch HQ”_ and _“HMP Finch”_ a rustic, slightly cheeky finish that suits the project perfectly.\n\n* * *\n\n### Finishing Touches\n\nOnce the burning was complete, I moved on to assembly and protection:\n\n  * **Hoops added** to the top for hanging\n  * **Jute rope** threaded through for that rustic, handmade look\n  * A coat of **varnish** to seal everything and bring out the grain\n\n\n\nThe varnish step really helped unify the piece and gave it a more polished (but still natural) finish.\n\n* * *\n\n### Final Thoughts\n\nWood burning paste is a fantastic way to get that pyrography look without specialized tools - but it does reward a bit of preparation and the right setup.\n\nIf you’re trying this yourself:\n\n  * Sand first (seriously)\n  * Use a heat gun nozzle\n  * Be patient - but maybe not _10 minutes_ patient\n\n\n\nAnd if your project happens to involve a rescue full of chaotic finches, I can confirm: having both an official sign and a joking “prison wing” version feels entirely appropriate.\n\n* * *\n\nNext time, I’ll spend less time fighting the heat gun and more time enjoying the process - but for now, Finch HQ (and HMP Finch) are officially open for business. You can follow them here:",
  "title": "Wood Burning Paste, Heat Guns, and a Lesson in Patience (for Finch HQ 🐦)",
  "updatedAt": "2026-05-06T18:00:30.503Z"
}